Model Information for 0430251600

Basic Information

• Model Number: 0430251600
• Series: Micro-Fit Dual Row Connectors
• Type: Receptacle
• Circuit Size: 16 Circuits
• Termination: Crimp
• Wire Gauge: 18 to 30 AWG stranded wire
• Plating: Tin or Gold

Product Description

The 0430251600 is a 16-circuit receptacle in the Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire-to-board and wire-to-wire connector system. It is designed for use with 18 to 30 AWG stranded wire and utilizes crimp technology with tin or gold plating.

Dimensions and Tolerances

• Material:"A": Unfilled Polyester, UL 94V-0, Black"B": Unfilled Nylon, UL 94V-0, Low Halogen, Black
• Dimensions:Circuit 1:Length: 1.215 inches (30.85 mm)Width: 1.063 inches (27.00 mm)Circuit 2:Length: 1.096 inches (27.85 mm)Width: 0.945 inches (24.00 mm)Last Circuit:Length: 0.978 inches (24.85 mm)Width: 0.827 inches (21.00 mm)
• General Tolerances:4 Places: ±0.000 inches (±0.000 mm)3 Places: ±0.001 inches (±0.025 mm)2 Places: ±0.014 inches (±0.35 mm)1 Place: ±0.010 inches (±0.25 mm)Angular Tolerance: ±0.5°

Assembly and Testing

• Assembly:This receptacle mates with plug 43020 and header 43045.Use with Molex female terminal series 43030 or 46235.Terminal orientation in the housing is shown in section "A"-"A".
• Testing:Testing is performed using Micro-Fit test plug series 44242-****.Test plugs must not be used for make or break under load.Molex does not recommend using standard mating components for harness testing purposes.

Packaging

• Packaging Specification: PK-43025-001

Notes

1. Housing Material:"A": Unfilled Polyester, rated UL 94V-0, color is black."B": Unfilled Nylon, rated UL 94V-0, low halogen, color is black.
2. Finish: N/A
3. Product Specification: PS-43045
4. Packaging Specification: PK-43025-001
5. Compatibility: This receptacle mates with 43020 and 43045.
6. Terminal Series: Use with Molex female terminal series 43030 or 46235.
7. Overmolding Parameters: See Application Specification 430250000-AS.
8. Pull Tabs: Top pull tabs are not available on 2 and 4 circuit parts.
9. Testing: Use Micro-Fit test plug series 44242-**** for testing.
10. Gate Blemish: Some housings may have a small gate blemish near the gate that does not affect functionality.
11. Circuit Identifier: Housings have either an identifier rib or engraved "1" symbol to indicate circuit #1. Identifier type is tool-dependent and not selectable.
12. Dimension 'A': Measured at datum.
13. Cosmetic Specification: This part conforms to Class 'B' requirements of cosmetic specification PS-45499-002.
14. Text on Part: Text and text location may vary depending on part number and/or tool.

Documentation

• Document Number: 430250000-SD
• Document Type: PSD
• Part Number: 0430251600
• Revision: A
• Created by: A. Zahirovic
• Checked by: S. Sousek
• Approved by: F. Smith
• Initial Release Date: 2018/06/01

Additional Information

• Third Angle Projection Drawing Series: D-SIZE 43025
• Dimension Units: IN/MM
• Scale: NTS (Not to Scale)
• Document Status: P1 RELEASE
• Release Date: 2018/06/01
• This drawing contains information that is proprietary to Molex Electronic Technologies, LLC and should not be used without written permission.