DESCRIPTION

· Center-drill the shaft to a depth of 0.5" with a No. 21 drill, then tap for a 10/32 UNF screw.

· Apply adhesive to the screw threads and secure onto the end of the shaft with the provided 10-32 mounting screw.

· Torque the mounting screw to a maximum of 8-10 foot pounds.

· The number of pulses per revolution generated by the Pulser Disc and sensor depends on the sensor used.

· Hall Effect sensor produces one pulse for every two magnets.

· Magnetoresistive sensor generates one square wave pulse per magnet.

· Special discs can be custom manufactured to meet specific needs.

· Steel slugs are available on aluminum or PVC discs.

FEATURES

· Non-contact sensing, up to 0.5" gap distance (dependent on magnet size/configuration).

· End-of-shaft mounting.

· Made of nylon, PVC, aluminum, or stainless steel.

· Custom sizes and number of pulses available.

· Impervious to water, grease, dust, oil, dirt, etc.

· Large gap distance from the sensor allows maximum flexibility in mounting.

APPLICATIONS

· Ideal for environments with vibration, dirt, dust, grease, or water.

· Face Read: 0.25" thick discs with 0.25" or 0.5" diameter magnets mounted on the face of the disc.

· Edge Read: 0.625" thick discs with 0.25" or 0.5" diameter magnets mounted around the circumference.