Model Information for BLM18TG601TN1D

General Information

• Manufacturer: Murata Mfg. Co., Ltd.
• Specification Number: JENF243A_0003AM-01
• Product Series: BLM18 Series

Part Number Breakdown

• Customer Part Number: N/A
• Murata Part Number: BLM18TG601TN1DBLM18: Product IDTG: Dimension (L × W)601: Impedance (Typical value at 100 MHz)TN1D: Packaging (Taping)

Electrical Ratings

• Impedance at 100 MHz: 600 ± 25% Ω
• Rated Current:Ambient Temperature 85°C: 200 mAAmbient Temperature 125°C: 100 mA
• DC Resistance (Ω max.):Initial Values: 0.45 ΩValues after Testing: 0.60 Ω

Applications

• For General Use (Thin Type): Suitable for general applications requiring a thin form factor.

Operating and Storage Conditions

• Operating Temperature Range: -55°C to +125°C
• Storage Temperature Range: -55°C to +125°C

Mechanical and Environmental Performance

• Shear Test: No significant mechanical damage; impedance change rate within ±30% at 100 MHz.
• Bending Test: No significant mechanical damage; impedance change rate within ±30% at 100 MHz.
• Vibration Test: No significant mechanical damage; impedance change rate within ±30% at 100 MHz.
• Resistance to Soldering Heat: No significant mechanical damage; impedance change rate within ±30% at 100 MHz.
• Drop Test: No significant mechanical damage after dropping from a height of 75 cm in three directions (total 9 times).
• Solderability: 95% or more of the outer electrode shall be covered with new solder seamlessly.

Environmental Performance

• Temperature Cycle Test: No significant mechanical damage; impedance change rate within ±30% at 100 MHz.
• Humidity Test: No significant mechanical damage; impedance change rate within ±30% at 100 MHz.
• Heat Life Test: No significant mechanical damage; impedance change rate within ±30% at 100 MHz.
• Cold Resistance Test: No significant mechanical damage; impedance change rate within ±30% at 100 MHz.

Packaging Specifications

• Tape Width: 8 mm (Paper tape)
• Packing Quantity: 10000 pcs/reel
• Packing Method: Products are placed in cavities of a carrier tape and sealed by a cover tape.
• Feed Hole Position: On the right side when the cover tape is pulled toward the user.
• Joint: Seamless
• Break Down Force of Tape:Cover Tape: 5 N min.Bottom Tape: Not applicable
• Peeling Off Force: 0.1 N to 0.6 N
• Leader and Trailer Sections: Vacant sections provided for the product.
• Reel Marking: Customer part number, Murata part number, inspection number, RoHS marking, quantity, etc.
• Outer Box Marking: Customer name, purchasing order number, customer part number, Murata part number, RoHS marking, quantity, etc.
• Outer Box Dimensions: 186 mm (W) × 186 mm (D) × 93 mm (H)

Precautions and Notes

• Limitation of Applications: Not suitable for aircraft, aerospace, undersea, power plant control, medical, transportation, traffic control, disaster prevention/security, industrial data-processing, combustion/explosion control, or equivalent complex/reliable equipment.
• Precautions on Rating: Avoid using beyond the rated temperature range, voltage, or current.
• Inrush Current: Avoid applying an inrush current that significantly exceeds the rated current.
• Corrosive Gas: Avoid using in environments with corrosive gases or oils.
• Mounting Conditions: Ensure proper land dimensions, flux, and soldering conditions as specified.
• Storage and Transportation: Use within 6 months after delivery; store in a controlled environment.