Surface-Mount Ceramic Multilayer Capacitors - CC0805JRX7R9BB104

Product Information

• Part Number: CC0805JRX7R9BB104
• Manufacturer: YAGEO
• Series: General Purpose & High Capacitance X7R
• Voltage Rating: 100V
• Capacitance: 100 pF
• Tolerance: ±10%
• Operating Temperature Range: -55°C to +125°C
• Termination: Nickel-barrier end termination
• Compliance: RoHS compliant, Halogen Free compliant

Features

• High Capacitance: Suitable for applications requiring high capacitance values.
• Stable Performance: Exhibits stable capacitance over a wide temperature range.
• Compact Size: Ideal for space-constrained applications.
• High Voltage Rating: Capable of withstanding higher operating voltages.

Applications

• Consumer Electronics: PCs, hard disks, game consoles, DVDs, video cameras, mobile phones, and data processing devices.
• Power Management: Voltage regulation and filtering in power supply circuits.
• Signal Processing: Decoupling and noise reduction in high-frequency circuits.
• Automotive Electronics: In-vehicle infotainment systems, engine control units, and other automotive applications.

Ordering Information

• Global Part Number: CC0805JRX7R9BB104
• Packaging: Supplied in tape on reel (Paper/PE taping reel; Reel 7 inch)
• Lead Time: Typically 4-6 weeks (subject to availability)
• Minimum Order Quantity (MOQ): 1,000 pieces

Specifications

• Size Code (inch/mm): 0805 (2.0 mm x 1.25 mm)
• Thickness Max. (mm): 0.85 mm
• Rated Voltage (Vdc): 100V
• Capacitance Tolerance: ±10%
• Temperature Coefficient of Capacitance (TCC): X7R (±15% over -55°C to +125°C)
• Capacitance Value: 100 pF

Dimensions

• Length (L): 2.0 mm ±0.1 mm
• Width (W): 1.25 mm ±0.1 mm
• Height (T): 0.85 mm ±0.1 mm

Electrical Characteristics

• Dissipation Factor (D.F.): ≤ 5% at 1 kHz, 0.5 Vrms at 20°C
• Insulation Resistance (I.R.): ≥ 10 GΩ or Rins × Cr ≥ 500 seconds at 100V DC for 1 minute

Test and Measurement Conditions

• Temperature: 15°C to 35°C
• Relative Humidity: 25% to 75%
• Air Pressure: 86 kPa to 106 kPa

Soldering Recommendation

• Soldering Method: Reflow only
• Preheating: 120°C to 150°C for 1 minute
• Solder Bath Temperature: 260°C ±5°C
• Dipping Time: 10 ±0.5 seconds
• Recovery Time: 24 ±2 hours

Reliability and Testing

• Mounting: Capacitors may be mounted on printed-circuit boards or ceramic substrates.
• Visual Inspection and Dimension Check: Any applicable method using ×10 magnification.
• Temperature Characteristic: Capacitance change within ±15% over -55°C to +125°C.
• Adhesion: Force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate.
• Bending Strength: No visible damage after bending 1 mm at a rate of 1 mm/s, radius jig 5 mm.
• Resistance to Soldering Heat: Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned.

Notes

• Derating: For specific derating requirements, please refer to the individual product specification.
• Special Ordering: For special ordering codes or additional information, please contact the local sales force.

Ordering Code

• Global Part Number (Preferred): CC0805JRX7R9BB104