Meritek CR161692F

View All Accessories by Meritek

Part Number:
CR161692F
Manufacturer:
Meritek
Category:
Accessories
RoHs:
RoHS Compliant
Datasheet:
CR161692F_Datesheet
Description:
RES SMD 16.9K OHM 1% 1/10W 0603
In stock 115,000

" Not available to buy online? Want the lower wholesale price? Please send RFQ, we will respond immediately

Leave Us A Message!

[email protected]

We`re not around but we still want to hear from you! Leave us a note:

SEND

*You can contact us directly on WhatsApp!

Specifications

Type

Paramete

Type

Paramete

Features

Tolerance

±1%

Height - Seated (Max)

0.022" (0.55mm)

Operating Temperature

-55°C ~ 155°C

Package / Case

0603 (1608 Metric)

Number of Terminations

Size / Dimension

0.063" L x 0.031" W (1.60mm x 0.80mm)

Composition

Thick Film

Temperature Coefficient

±100ppm/°C

Power (Watts)

0.1W, 1/10W

Supplier Device Package

Resistance

16.9 kOhms

Ratings

Failure Rate

Overview

Specification Sheet: Model CR161692F Thick Film Chip Resistor

Basic Information

Product Category: Thick Film Chip Resistor (Fixed Resistor)
Manufacturer: Meritek Electronics Corporation
Series: CR Series
Part Number Decoding:CR: Meritek Thick Film Chip Resistor Series Identifier16: Size Code, corresponding to 0603 package (per CR Series numbering system: 16 = 0603)1692: Resistance Value Code, 4-digit coding rule (first 3 digits = significant digits, last 1 digit = multiplier $$10^$$) → 169 × $$10^$$ = 16,900Ω = 16.9kΩF: Tolerance Class, ±1% (per CR Series tolerance coding: B=±0.1%, D=±0.5%, F=±1%, G=±2%, J=±5%)Packaging: Not explicitly marked in the part number; default to standard 7” reel (13” reel indicated by suffix “13” which is absent here)
Compliance: RoHS Compliant (lead-free, consistent with CR Series environmental standards)
Technology: Metal Glaze/Thick Film (standard for CR Series)
Mounting Type: Surface Mount (SMT)
Terminal Configuration: 2 terminals, Wraparound Terminal Shape
Document Reference: CR Series Datasheet (Rev. 7g, 01/30/18)
Reach Compliance Code: Unknown (consistent with industry data for CR16 type)

Electrical Characteristics

Parameter	Specification	Test Conditions/Notes
Rated Power	1/10W (0.1W)	At 70°C ambient temperature; derating required for temperatures exceeding 70°C
Maximum Working Voltage	75V	Shall not exceed power or current limits
Maximum Overload Voltage	150V	Short-term overload, not for continuous operation
Resistance Value	16.9kΩ	Calculated from “1692” code (169 × 10²Ω); falls within CR16’s resistance range (1Ω ~ 22MΩ)
Tolerance	±1%	Corresponding to “F” in part number
Temperature Coefficient of Resistance (TCR)	±100ppm/°C (for 100Ω ~ 1MΩ)	Applies to 16.9kΩ (within 100Ω ~ 1MΩ range); ±200ppm/°C for 1Ω ~ <10Ω (not applicable here)
Noise Level	≤ 15dB (5.6μV/V)	For resistance range 10kΩ ~ 100kΩ (16.9kΩ falls here); measured per JIS-C5201-1 4.12
Maximum Current	1A (standard) / 2A (jumper)	Standard current rating for CR16; 2A for jumper configurations (not applicable to 16.9kΩ)
Jumper Resistance	50mΩ Max	Only applicable to jumper resistors (not 16.9kΩ); included for completeness

Resistance Range & TCR Details

Resistance Range Compatibility: 1Ω ~ 22MΩ (CR16 series covers 1≤R<10Ω, 10\1MΩ, 10\22MΩ; 16.9kΩ fits 10~22MΩ for ±1% tolerance)
TCR Breakdown by Resistance Range:1Ω ~ <10Ω: ±200ppm/°C (not applicable to 16.9kΩ)100Ω ~ 1MΩ: ±100ppm/°C (applies to 16.9kΩ)10~22MΩ: ±100ppm/°C (consistent with 16.9kΩ’s range)

Power Derating Requirement

Derating Curve: Follows “CR01 ~ CR20 Derating Curve” (standard for CR Series except CR25); power decreases linearly as ambient temperature exceeds 70°C, reaching 0W at 155°C (maximum operating temperature)
Example Derating Values:70°C: 100% rated power (0.1W)100°C: ~60% rated power (0.06W)125°C: ~40% rated power (0.04W)155°C: 0W (maximum operating temperature)

Dimension	Minimum	Typical	Maximum	Description
Length (L)	1.60	-	1.60±0.10	Overall length of the resistor body
Width (W)	0.80	-	0.80±0.10	Overall width of the resistor body
Height (H)	0.45	-	0.45±0.10	Height of the resistor body (excluding terminals)
Terminal Length 1 (L1)	0.25	-	0.25±0.15	Length of wraparound terminal on one side
Terminal Length 2 (L2)	0.35	-	0.35±0.15	Length of wraparound terminal on the other side
Terminal Thickness	-	-	Consistent with wraparound design	Thin-film Ni/Sn plating for solderability

Land Pattern Dimension	Specification (mm)	Notes
A (Land Length)	0.8	Length of the PCB pad for terminals
B (Land Width)	2.1	Width of the PCB pad for terminals
C (Pad Spacing)	0.9	Spacing between the two terminal pads
-	-	Optimized for 0603 package to ensure proper solder coverage and mechanical stability

Reliability Test Conditions & Requirements

All tests comply with JIS-C5201-1, MIL-STD-202, or JESD standards; requirements below are specific to CR161692F.

Test Item	Standard	Test Conditions	Acceptance Criteria
Short Time Overload	JIS-C5201-1 4.13	Apply 2.5× rated voltage (187.5V) for 5s; rest 30min before measurement	Resistance change: ±(1.0% + 0.05Ω) (16.9kΩ → ±169.05Ω max); no mechanical damage, no short/burn marks
Insulation Resistance	JIS-C5201-1 4.6	Apply 100VDC for 1min between electrodes and insulation	≥10⁹Ω
Dielectric Withstand Voltage	JIS-C5201-1 4.7	Apply 300VAC for 1min (CR16/20/25 type standard)	No short circuit, no burn marks
Intermittent Overload	JIS-C5201-1 4.13	25°C ambient; 2.5× rated voltage (187.5V) for 1s ON, 25s OFF; 10,000~10,400 cycles	Resistance change: ±(5.0% + 0.10Ω) (16.9kΩ → ±845.1Ω max); no mechanical damage
Core Body Strength	JIS-C5201-1 4.15	Apply 10N force via R0.2 test probe at center for 10s	Resistance change: ±(1.0% + 0.05Ω); no cracks, no terminal peeling
Solderability	JIS-C5201-1 4.17	Precondition: PCT (105°C, 100% RH, 1.22×10⁵Pa) for 4h; immerse in 235±5°C solder for 2s	≥95% solder coverage on terminals; no voids
Resistance to Soldering Heat	JIS-C5201-1 4.18	Immerse in 260~265°C solder for 10s (Method 1); 30s (Method 2)	Method 1: Resistance change ±(1.0% + 0.05Ω); no electrode damage Method 2: ≥95% solder coverage
Vibration	JIS-C5201-1 4.22	10~55Hz (1.5mm amplitude), 2h per axis (3 axes total)	Resistance change: ±(1.0% + 0.05Ω); no mechanical damage
Dry Heat Resistance	JIS-C5201-1 4.25	155±5°C for 1000~1048h; cool to room temp for 1h before measurement	Resistance change: ±(1.0% + 0.05Ω); no discoloration or cracks
Thermal Shock	MIL-STD 202 Method 107	-55±5°C ↔ 125±5°C (15min per temp), 300 cycles	Resistance change: ±(0.5% + 0.05Ω) (16.9kΩ → ±84.55Ω max); no mechanical failure
Load Life	JIS-C5201-1 4.25	70±2°C; 90min ON (rated voltage:75V) / 30min OFF; 1000h total	Resistance change: ±(2.0% + 0.10Ω) (16.9kΩ → ±338.1Ω max); no burn marks
Whisker Test	JESD22A121 Class 2	1500 thermal shock cycles; inspect for whiskers	Max whisker length ≤50μm

Packaging & Tape/Reel Specifications

Standard Packaging

Tape Type: TH (Paper) or TP (Plastic) Carrier Tape (standard for CR16)
Tape Width: 8mm (fixed for CR16 type)
Reel Type: Default 7” reel; 10”/13” reels available on request
Packaging Quantity:TH Paper/PE Tape: 40,000 pieces per 13” reel (standard for CR16)TP Plastic Tape: 20,000 pieces per 10” reel (optional)
Reel Dimensions (7” Reel for 8mm Tape):Wa (Reel Width): 9.0±0.5mmM (Reel Diameter): 178±2.0mmA (Hub Diameter): 2.0±0.5mmB (Flange Thickness): 13.5±0.5mmC (Flange Diameter): 21.0±0.5mmD (Hub Depth): 60.0±1.0mm

Tape Carrier Dimensions (TH/TP Tape for CR16)

Tape Dimension	Specification (mm)	Tolerance	Description
A (Pocket Length)	1.80	±0.10	Length of the pocket holding the resistor
B (Pocket Width)	1.00	±0.10	Width of the pocket holding the resistor
W (Tape Width)	8.00	±0.20	Overall width of the carrier tape
E (Pocket Depth)	1.75	±0.10	Depth of the pocket holding the resistor
F (Cover Tape Seal Width)	3.50	±0.05	Width of the area where cover tape is sealed
T1 (Bottom Tape Thickness)	0.60	+0.2/-0	Thickness of \| Land Pattern Dimension \| Specification (mm \| Dimension \| Minimum \| Typical \| Maximum \| \| Parameter \| Specification \| Test Conditions/Notes \| \|-----------\|

Shopping Guide

Purchase

No need to register to order from JMBom Electronics, but signing in lets you track your order like a pro. Give it a try for a smoother shopping ride.

Means

Easy peasy! Pay your way with PayPal, Credit Card, or wire transfer in USD. We've got you covered.

RFQ（Request for Quotations）

Get the freshest prices and stock updates by asking for a quote! Our sales team will shoot you an email within a day. It's that simple.

IMPORTANT NOTICE

1. Look out for your order details in your inbox! (If it's missing, check the spam folder just in case.)

2. Our sales manager will double-check the order and keep you posted on any price or stock changes. No worries, we've got you covered.

Shipping Rate

We ship orders once a day around 5 p.m., except Sunday. Once shipped, the estimated delivery time depends on the courier company you choose, usually 5-7 working days.