74HC174D-Q100J - Hex D-type Flip-Flop with Reset; Positive-Edge Trigger

General Description:
The 74HC174D-Q100J is a hex positive edge-triggered D-type flip-flop with individual data inputs (Dn) and outputs (Qn). It features a common clock (CP) and master reset (MR) inputs that load and reset all flip-flops simultaneously. The D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition is stored in the flip-flop and appears at the Q output. A LOW on MR causes the flip-flops and outputs to be reset LOW. Inputs include clamp diodes, enabling the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product is qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and Benefits:

• Automotive product qualification in accordance with AEC-Q100 (Grade 1)
• Specified from -40 °C to +85 °C
• Wide supply voltage range from 2.0 to 6.0 V
• CMOS low power dissipation
• High noise immunity
• Input levels: CMOS level for 74HC174-Q100 and TTL level for 74HCT174-Q100
• Six edge-triggered D-type flip-flops
• Asynchronous master reset
• Complies with JEDEC standards: JESD8C (2.7 V to 3.6 V) and JESD7A (2.0 V to 6.0 V)
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• ESD protection: HBM (ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V) and CDM (ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V)

Ordering Information:

• Package Type: SO16 plastic small outline package; 16 leads; body width 3.9 mm
• Temperature Range: -40 °C to +125 °C
• Name Description: 74HC174D-Q100J

Electrical Data:

• Supply Voltage: 4.75 – 30 VDC
• Current Consumption: ≤60 mA @ 5V DC, ≤30 mA @ 10V DC, ≤25 mA @ 24V DC
• Power Consumption: ≤ 1.0 W
• Start-Up Time: < 1 s
• Min. Load Resistance: 120 Ω
• Reverse Polarity Protection: Yes
• Short Circuit Protection: Yes

Pin Configuration:

• Pin 1: MR (asynchronous master reset input, active LOW)
• Pin 2-7: Q0-Q5 (flip-flop outputs)
• Pin 8: GND (ground)
• Pin 9: CP (clock input, LOW-to-HIGH edge-triggered)
• Pin 10-15: D0-D5 (data inputs)
• Pin 16: VCC (positive supply voltage)

Environmental Compliance:

• Protection Class (Shaft): IP65
• Protection Class (Housing): IP66/IP67
• Operating Temperature: -40 °C to +85 °C
• Humidity: 98% RH, no condensation

Package Outline:

• SO16 package dimensions are provided in the data sheet, with maximum, nominal, and minimum values for key package dimensions.

Legal Information:

• The product has been qualified for automotive applications and is compliant with the AEC-Q100 standard.
• Nexperia reserves the right to make changes to the product as described in the data sheet.