ATmega8535L-8AU Model Information

Overview

The ATmega8535L-8AU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It is designed to achieve high throughput while maintaining low power consumption, making it suitable for a wide range of embedded control applications.

Key Features

• Architecture: Advanced RISC architecture with 130 powerful instructions, most executed in a single clock cycle.
• Clock Speed: Operates at up to 8 MHz.
• Program Memory: 8K bytes of In-System Self-Programmable Flash with Read-While-Write capabilities.
• Data Memory: 512 bytes EEPROM and 512 bytes SRAM.
• I/O Lines: 32 programmable I/O lines.
• Timers/Counters: Three flexible Timer/Counters with compare modes.
• ADC: 8-channel, 10-bit ADC with optional differential input stage and programmable gain.
• Serial Interfaces: Byte-oriented Two-wire Serial Interface, programmable serial USART, and SPI serial interface.
• Power Management: Six sleep modes including Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby.
• Operating Voltage: 2.7 - 5.5V.
• Package Type: 44A - 44-lead, Thin (1.0 mm) Plastic Gull Wing Quad Flat Package (TQFP).

Pin Configuration

The ATmega8535L-8AU features a 44-lead TQFP package with the following pin configuration:

Ordering Information

• Speed: 8 MHz
• Operating Voltage: 2.7 - 5.5V
• Package Type: 44A - 44-lead, Thin (1.0 mm) Plastic Gull Wing Quad Flat Package (TQFP)
• Temperature Range: Commercial (0°C to 70°C)
• Ordering Code: ATmega8535L-8AU

Applications

The ATmega8535L-8AU is suitable for a variety of applications, including but not limited to:

• Industrial Control Systems: For monitoring and controlling industrial processes.
• Communication Systems: For implementing communication protocols and interfaces.
• Consumer Electronics: For embedded control in consumer devices.
• Automotive Applications: For automotive control and monitoring systems.

Development Tools

The ATmega8535L-8AU is supported by a comprehensive suite of development tools, including:

• C Compilers: For writing and compiling C code.
• Macro Assemblers: For writing and assembling low-level code.
• Program Debugger/Simulators: For debugging and simulating the microcontroller's behavior.
• In-Circuit Emulators: For real-time debugging and testing.
• Evaluation Kits: For evaluating the microcontroller's performance in various applications.

Conclusion

The ATmega8535L-8AU is a versatile and powerful microcontroller that offers a wide range of features and capabilities, making it an excellent choice for a variety of embedded control applications. Its low power consumption and high throughput capabilities ensure efficient and reliable performance in diverse environments.