Product Information Summary for BTS410F2 E3062A BUMA1

General Description

The BTS410F2 is a smart high-side power switch designed for automotive and industrial applications. It features integrated protection functions such as overload protection, current limitation, short circuit protection, thermal shutdown, overvoltage protection, and fast demagnetization of inductive loads. The device is suitable for replacing electromechanical relays, fuses, and discrete circuits.

Key Features

• Overload protection
• Current limitation
• Short circuit protection
• Thermal shutdown
• Overvoltage protection (including load dump)
• Fast demagnetization of inductive loads
• Reverse battery protection
• Undervoltage and overvoltage shutdown with auto-restart and hysteresis
• Open drain diagnostic output
• Open load detection in ON-state
• CMOS compatible input
• Loss of ground and loss of Vbb protection
• Electrostatic discharge (ESD) protection
• Green Product (RoHS compliant)
• AEC Qualified

Electrical Specifications

• Overvoltage Protection (Vbb(AZ)): 65 V
• Operating Voltage (Vbb(on)): 4.7 ... 42 V
• On-state Resistance (RON): 220 mΩ
• Load Current (ISO): 1.8 A
• Current Limitation (IL(SCr)): 2.7 A
• Package: PG-TO263-5-2

Maximum Ratings (Tj = 25 °C unless otherwise specified)

• Supply Voltage (Vbb): 65 V
• Load Dump Protection (VLoadDump): 100 V
• Operating Temperature Range (Tj): -40 ... +150 °C
• Storage Temperature Range (Tstg): -55 ... +150 °C
• Power Dissipation (Ptot): 50 W (DC), TC ≤ 25 °C
• Inductive Load Switch-off Energy Dissipation (EAS): 4.5 J (Vbb = 12V, Tj,start = 150°C, TC = 150°C const., IL = 1.8 A, ZL = 2.3H, 0 Ω)
• Electrostatic Discharge Capability (ESD): 1 kV (Human Body Model) for IN pin; 2 kV for all other pins

Pin Configuration

• Pin 1 (GND): Logic ground
• Pin 2 (IN): Input, activates the power switch in case of logical high signal
• Pin 3 (Vbb): Positive power supply voltage, the tab is shorted to this pin
• Pin 4 (ST): Diagnostic feedback, low on failure
• Pin 5 (OUT): Output to the load

Applications

• Microcontroller Compatible Power Switch: Suitable for 12 V and 24 V DC grounded loads
• Inductive Loads: Most suitable for inductive loads
• Replacement for Electromechanical Relays, Fuses, and Discrete Circuits

Ordering Information

• Package Type: PG-TO263-5-2
• Ordering Code: BTS410F2 E3062A SP001104818