GAL22V10D-15LP Product Information

Overview

The GAL22V10D-15LP is a high-performance E2CMOS® programmable logic device (PLD) from Lattice Semiconductor Corporation. It is part of the Generic Array Logic™ (GAL) family and is designed for complex logic designs with low power consumption and high-speed performance. This particular model is available in a 28-pin PLCC (Plastic Leaded Chip Carrier) package.

Product Status

• Status: Discontinued
• Reference PCN: PCN#13-10

Features

• High Performance E2CMOS Technology:4ns maximum propagation delay.Fmax = 250MHz.3.5ns maximum from clock input to data output.
• Active Pull-Ups on All Pins.
• Compatibility:Fully function/fuse-map/parametric compatible with standard 22V10 devices.Compatible with bipolar and UV CMOS 22V10 devices.
• Power Efficiency:50% to 75% reduction in power versus bipolar devices.90mA typical Icc on low power devices.45mA typical Icc on quarter power devices.
• E2Cell Technology:Reconfigurable logic.Reprogrammable cells.100% tested/100% yields.High-speed electrical erasure (<100ms).20-year data retention.
• Output Logic Macrocells:Ten output logic macrocells for maximum flexibility.Preload and power-on reset of registers.100% functional testability.
• Applications:DMA control.State machine control.High-speed graphics processing.Standard logic speed upgrade.
• Electronic Signature for Identification.
• Lead-Free Package Options.

Ordering Information

• Ordering Part Number: GAL22V10D-15LP
• Package Type: 28-pin PLCC
• Operating Temperature Range:Commercial Grade: 0°C to +75°CIndustrial Grade: -40°C to +85°C
• Supply Voltage:Commercial Grade: +4.75V to +5.25VIndustrial Grade: +4.50V to +5.50V

Electrical Characteristics

• Input Low Voltage (VIL): 0V to 0.8V
• Input High Voltage (VIH): 2.0V to Vcc + 1.0V
• Output Low Voltage (VOL): 0V to 0.4V (at IOL = MAX)
• Output High Voltage (VOH): 2.4V to Vcc (at IOH = MAX)
• Low Level Output Current (IOL): 16mA
• High Level Output Current (IOH): -3.2mA
• Output Short Circuit Current (IOS): -30mA to -130mA (at VCC = 5V, VOUT = 0.5V, TA = 25°C)

AC Switching Characteristics

• Propagation Delay (tpd): 3ns to 7.5ns
• Clock to Output Delay (tco): 3.5ns to 4.5ns
• Setup Time (tsu): 4.5ns to 15ns
• Hold Time (th): 0ns
• Maximum Clock Frequency (fmax):External Feedback: 111MHz to 250MHzInternal Feedback: 133MHz to 200MHzNo Feedback: 166MHz to 250MHz

Package Information

• Package Type: 28-pin PLCC
• Lead Finish: Lead-Free
• Moisture Sensitivity Level (MSL): Level-2-260C-1 YEAR
• Storage Temperature: -65°C to +150°C
• Lead Temperature (Soldering, 10 sec.): +300°C

Additional Information

• Electronic Signature: 64-bit reprogrammable memory for user-defined data.
• Security Cell: Prevents unauthorized copying of the array patterns.
• Latch-Up Protection: On-board charge pump to prevent latch-up.
• Output Register Preload: Allows synchronous setting of registered outputs for testing.
• Input Buffers: TTL level compatible with built-in active pull-ups.