GAL22V10D-25LP Model Information

Overview

The GAL22V10D-25LP is a high-performance E2CMOS® programmable logic device (PLD) designed for complex logic designs. It features a 25ns maximum propagation delay and is compatible with standard 22V10 devices. This model is designed for commercial applications and is available in a low-power package.

Key Features

• High Performance E2CMOS Technology: 4ns maximum propagation delay.
• Maximum Clock Frequency: 250MHz.
• Active Pull-Ups on All Pins: Ensures reliable operation.
• Fully Compatible with Standard 22V10 Devices: Function, fuse map, and parametric compatibility.
• Reduced Power Consumption: 50% to 75% less power compared to bipolar devices.
• E2Cell Technology: Reconfigurable logic, reprogrammable cells, high-speed electrical erasure (<100ms), and 20-year data retention.
• Ten Output Logic Macrocells: Maximum flexibility for complex logic designs.
• Preload and Power-On Reset of Registers: 100% functional testability.
• Applications: DMA control, state machine control, high-speed graphics processing, standard logic speed upgrade.
• Electronic Signature for Identification: User-defined data storage.
• Lead-Free Package Options: Environmentally friendly.

Specifications

• Propagation Delay (tpd): 4ns maximum.
• Clock to Output Delay (tco): 3.5ns maximum.
• Setup Time (tsu): 2.5ns.
• Hold Time (th): 0ns.
• Maximum Clock Frequency (fmax): 250MHz (no feedback).
• Operating Power Supply Current (Icc): 90mA typical.
• Input Low Voltage (VIL): 0V to 0.8V.
• Input High Voltage (VIH): 2.0V to Vcc+1V.
• Output Low Voltage (VOL): 0V to 0.4V.
• Output High Voltage (VOH): 2.4V to Vcc.
• Low Level Output Current (IOL): 16mA.
• High Level Output Current (IOH): -3.2mA.
• Output Short Circuit Current (IOS): -30mA to -130mA.

Ordering Information

• Model Number: GAL22V10D-25LP
• Description: Low-power commercial grade programmable logic device.
• Package Type: Plastic DIP
• Speed: 25ns
• Grade: Commercial
• Power: Low Power

Pin Configuration

• Pin Count: 28
• Pin Configuration: DIP (Dual In-line Package)

Applications

• DMA Control: Direct memory access control.
• State Machine Control: Control of state machines.
• High-Speed Graphics Processing: Processing high-speed graphics.
• Standard Logic Speed Upgrade: Upgrading standard logic circuits.

Important Notes

• Data for Reference: The data provided in this spec sheet are for reference only. Electrical characteristics can vary depending on the environment or measurement conditions.
• Changes Without Notice: Lattice Semiconductor reserves the right to make changes to the data at any time without notice.
• Final Selection: Before making a final selection, please check the product specifications in detail.