Name: IR5001STRPBF
Brand: Infineon Technologies
SKU: JM-IR5001STRPBF
Availability: InStock

Infineon Technologies IR5001STRPBF

View All Display Drivers by Infineon Technologies

Part Number:
IR5001STRPBF
Manufacturer:
Infineon Technologies
Category:
Display Drivers
RoHs:
Non-RoHS Compliant
Datasheet:
IR5001STRPBF_Datesheet
Description:
IC OR CTRLR N+1 8SOIC
In stock 0

" Not available to buy online? Want the lower wholesale price? Please send RFQ, we will respond immediately

Leave Us A Message!

[email protected]

We`re not around but we still want to hear from you! Leave us a note:

SEND

*You can contact us directly on WhatsApp!

Specifications

Type

Paramete

Type

Paramete

Mounting Type

Surface Mount

Current - Supply

500 µA

Applications

-48V Dist Power Systems

Supplier Device Package

8-SOIC

Grade

Type

N+1 ORing Controller

Operating Temperature

0°C ~ 85°C

Delay Time - ON

27 µs

Qualification

FET Type

N-Channel

Delay Time - OFF

130 ns

Package / Case

8-SOIC (0.154", 3.90mm Width)

Ratio - Input:Output

N:1

Voltage - Supply

36V ~ 75V

Internal Switch(s)

Current - Output (Max)

Overview

IR5001STRPbF Package Option Addendum

Overview

The IR5001STRPbF is a universal active ORing controller and N-channel power MOSFET driver designed for high-speed Active ORing and reverse polarity protection applications. This device is suitable for a wide range of industrial and telecommunications applications.

Package Information

Package Type: SO-8 (Surface Mount)
Body Size (Nominal): 4.90 mm × 3.90 mm
Lead Pitch: 1.27 mm
Pin Count: 8

Ordering Information

Part Number: IR5001STRPbF
Status: Active
Material Type: Production
Package Quantity: 2500
Carrier: Tape & Reel
RoHS Compliance: Yes
Operating Temperature Range: -40°C to 125°C
Lead Finish/Ball Material: Pb-Free (Lead-Free)
Moisture Sensitivity Level (MSL): Level-3-260C-168 HR
Peak Reflow Temperature: 260°C

Tape and Reel Information

Reel Diameter: 330.0 mm
Reel Width (W1): 12.0 mm
Tape Dimensions:A (mm): 4.80 to 4.98B (mm): 1.27 (BSC)C (mm): 0.53 (REF)D (mm): 0.36 to 0.46E (mm): 3.81 to 3.99F (mm): 1.52 to 1.72G (mm): 0.10 to 0.25H (mm): 7 (BSC)J (mm): 5.80 to 6.20K (mm): 0° to 8°L (mm): 0.41 to 1.27T (mm): 1.37 to 1.57

Package Outline

Package Type: SO-8 (Surface Mount)
Body Size: 4.90 mm × 3.90 mm
Lead Pitch: 1.27 mm
Max Height: 1.57 mm

Pin Configuration

TableCopy

PIN#	PIN SYMBOL	PIN DESCRIPTION
1	Vline	IC power supply pin for 36V to 75V input communications systems. Minimum 25V has to be applied at this pin to bias the IC.
2	Vcc	Output pin of the internal shunt regulator, or input pin for biasing the IC via external resistor. This pin is internally regulated at 12.5V typical. A minimum 0.1uF capacitor must be connected from this pin to Gnd of IR5001.
3	FETch	FET check input pin. Together with FET status output pin, the FETch pin can be used to determine the state of the Active ORing circuit and power system redundancy.
4	FETst	FET status output pin. Together with FETch input pin, the FETst pin can be used to determine the state of the Active ORing circuit and power system redundancy.
5	INP	Positive input of internal comparator. This pin should connect to the source of N-channel Active ORing MOSFET.
6	INN	Negative input pin of internal comparator. This pin should connect to the drain of N-channel Active ORing MOSFET.
7	Gnd	Ground pin of the IR5001.
8	Vout	Output pin for the IR5001. This pin is used to directly drive the gate of the Active ORing N-Channel MOSFET.

Important Notes

Lead Finish: The lead finish is Pb-Free, which is suitable for most standard soldering processes.
Moisture Sensitivity Level: The device is rated at MSL 3, which means it can be exposed to ambient conditions for up to 168 hours before reflow soldering.
Reflow Temperature: The peak reflow temperature is 260°C, which is typical for lead-free soldering processes.
RoHS Compliance: The device complies with the Restriction of Hazardous Substances (RoHS) directive, ensuring it is free from harmful substances like lead.

Additional Information

Datasheet: For detailed electrical and mechanical specifications, refer to the IR5001STRPbF datasheet available on the International Rectifier website.
Support: For further assistance, contact International Rectifier customer support or visit their website for technical support and discussions.

Shopping Guide

Purchase

No need to register to order from JMBom Electronics, but signing in lets you track your order like a pro. Give it a try for a smoother shopping ride.

Means

Easy peasy! Pay your way with PayPal, Credit Card, or wire transfer in USD. We've got you covered.

RFQ（Request for Quotations）

Get the freshest prices and stock updates by asking for a quote! Our sales team will shoot you an email within a day. It's that simple.

IMPORTANT NOTICE

1. Look out for your order details in your inbox! (If it's missing, check the spam folder just in case.)

2. Our sales manager will double-check the order and keep you posted on any price or stock changes. No worries, we've got you covered.

Shipping Rate

We ship orders once a day around 5 p.m., except Sunday. Once shipped, the estimated delivery time depends on the courier company you choose, usually 5-7 working days.