NX5DV330BQ Datasheet Summary

General Description

The NX5DV330BQ is a quad 1-of-2 high-speed TTL-compatible video multiplexer/demultiplexer. It features a low ON resistance switch that allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device includes a digital select input (S), four independent inputs/outputs (nY0, nY1), a common input/output (nZ), and an active LOW enable input (E). Schmitt-trigger action at the enable input (E) and select input (S) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 4.0V to 5.5V.

Features

• 5Ω switch connection between two ports
• TTL-compatible input levels
• Minimal propagation delay through the switch
• ESD protection:HBM JESD22-A114E Class 2A exceeds 2000VMM JESD22-A115-A exceeds 200VCDM JESD22-C101C exceeds 1000V
• Latch-up testing exceeds 100mA (JEDEC standard JESD78)

Ordering Information

• Type number: NX5DV330BQ
• Package: Thin quad flat package (no leads); 16 terminals; body 2.5×3.5×0.85mm
• Temperature range: -40°C to +85°C

Functional Description

The NX5DV330BQ operates as a multiplexer or demultiplexer based on the control inputs. The enable input (E) and select input (S) determine the switching function. When E is LOW, the switch is enabled, and the select input (S) determines the connection between the inputs/outputs (Y0, Y1) and the common input/output (Z). When E is HIGH, the switch is turned off.

Limiting Values

• Supply voltage (Vcc): -0.5V to +7.0V
• Input voltage (VI): -0.5V to +7.0V
• Continuous switch current (Isw): 128mA
• Input clamping current (IK): -50mA (for Vi < 0V)
• Storage temperature: -65°C to +150°C
• Total power dissipation (Ptot): 500mW (derating applies based on package type and temperature)

Recommended Operating Conditions

• Supply voltage (Vcc): 4.0V to 5.5V
• HIGH-level input voltage (VIH): 2.0V
• LOW-level input voltage (VIL): 0.8V
• Hysteresis voltage (VH): 45mV
• Ambient temperature (Tamb): -40°C to +85°C

Static Characteristics

• Input clamping voltage (VIK): -1.2V (at VCC = 4.5V, II = -18mA)
• Input leakage current (II): ±1µA (at VCC = 5.5V, VI = GND or 5.5V)
• OFF-state leakage current (IS(OFF)): ±1µA (at VCC = 5.5V, VI = GND, VO = 0V to 5.5V)
• Power-off leakage current (IOFF): ±1µA (at VCC = 0V, VI = VO = 0V to 5.5V)
• Supply current (ICC): 3µA (at VCC = 5.5V, IO = 0mA, VI = VCC or GND)
• Additional supply current (∆ICC): 2.5mA (per input at specified TTL voltage level)
• Input capacitance (CI): 3.5pF (at VI = 5V or 0V)
• OFF-state input/output capacitance (Cio(off)): 6.0pF (Z port), 4.0pF (Y port)
• ON-state input/output capacitance (Cio(on)): 14pF (Z port)
• ON resistance (RON): 3Ω to 10Ω (depending on VCC and current conditions)

Dynamic Characteristics

• Turn-on time (ton): 4.0ns to 6.0ns (at Vcc = 4.5V to 5.5V)
• Turn-off time (toff): 2.3ns to 6.0ns (at Vcc = 4.5V to 5.5V)

Additional Dynamic Characteristics

• Differential gain (Gdif): 0.64% (at fi = 3.58MHz, R = 150Ω)
• Differential phase (dif): 0.1° (at fi = 3.58MHz, R = 150Ω)
• -3dB frequency response (f(-3dB)): 300MHz (at R = 150Ω)
• Isolation (OFF-state) (Qiso): -60dB (at fi = 10MHz, R = 150Ω)
• Crosstalk (Xtalk): -63dB (between switches, fi = 10MHz, R = 150Ω, R = 10Ω)

Package Outline

• Package type: Thin quad flat package (no leads); 16 terminals; body dimensions: 2.5×3.5×0.85mm

Abbreviations

• CDM: Charged Device Model
• ESD: ElectroStatic Discharge
• HBM: Human Body Model
• MM: Machine Model
• TTL: Transistor-Transistor Logic