SSCSAAN004NDAA5 - TruStability® Board Mount Pressure Sensor

General Description:
The SSCSAAN004NDAA5 is a part of the TruStability® Standard Accuracy Silicon Ceramic (SSC) Series, which are piezoresistive silicon pressure sensors offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. These sensors are fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). The SSC Series is calibrated over the temperature range of -20 °C to 85 °C [-4 °F to 185 °F] and operates from a single power supply of either 3.3 Vdc or 5.0 Vdc.

Key Features:

• Stability and reliability
• Industry-leading accuracy of ±0.25% Full Scale Span Best Fit Straight Line (FSS BFSL)
• Port and housing options simplify integration
• Wide pressure range from ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2O to ±150 psi
• Small package size
• Extremely low power consumption
• Optional internal diagnostic functions

Specifications:

• Pressure Range: ±0.4 mbar | ±40 Pa | ±0.16 inH2O
• Output Type: Analog
• Supply Voltage: 3.3 Vdc
• Compensated Temperature Range: -20 °C to 85 °C [-4 °F to 185 °F]
• Operating Temperature Range: -40 °C to 85 °C [-40 °F to 185 °F]
• Accuracy: ±0.25% FSS BFSL
• Total Error Band: Down to ±1% Full Scale Span

Package Information:

• Package Type: DIP (Dual In-Line Pin)
• Package Code: SSC
• Pressure Port: Single axial barbed port

Ordering Information:
The SSCSAAN004NDAA5 model number indicates the following:

• SSC: Series Designation
• SA: Analog output
• AN: Single axial barbed port
• 004: Pressure range in mbar (±0.4 mbar)
• ND: No special options
• AA5: Customization or specific configuration details

Additional Information:

• All products are designed and manufactured according to ISO 9001 standards.
• The sensor is intended for use with non-corrosive, non-ionic gases, such as air and other dry gases.
• Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O.