Pepperl+Fuchs, Inc. VDM28-15-L-IO/73C/110/122

View All Position, Proximity, Speed (Modules) by Pepperl+Fuchs, Inc.

Part Number:
VDM28-15-L-IO/73C/110/122
Manufacturer:
Pepperl+Fuchs, Inc.
Category:
Position, Proximity, Speed (Modules)
RoHs:
RoHS Compliant
Datasheet:
VDM28-15-L-IO/73C/110/122_Datesheet
Description:
PHOTO DISTANCE SEN 0.2-15M
In stock 0

" Not available to buy online? Want the lower wholesale price? Please send RFQ, we will respond immediately

Leave Us A Message!

[email protected]

We`re not around but we still want to hear from you! Leave us a note:

SEND

*You can contact us directly on WhatsApp!

Specifications

Type

Paramete

Type

Paramete

Cable Length

Connection Method

Connector, M12

Operating Temperature

-30°C ~ 50°C

Output Configuration

Analog

Sensing Method

Distance-Settable (BGS)

Adjustment Type

Voltage - Supply

10V ~ 30V

Ingress Protection

IP65

Light Source

Red Laser Diode (660nm)

Response Time

10ms

Sensing Distance

7.874" ~ 590.551" (200mm ~ 15m)

Overview

Information of VDM28-15-L-IO/73C/110/122 Distance Sensor

Basic Overview

Product Type: Universal distance sensor with IO-Link interface
Manufacturer: Pepperl+Fuchs Group
Document Reference: 232769_eng.pdf (Release Date: 2023-03-28)
Core Function: Distance measurement using Pulse Ranging Technology (PRT) for non-contact object detection
Key Features: IO-Link V1.0 interface, 4–20 mA analog output, push-pull switching output, minimal black-white difference, compact design
Target Applications: Industrial automation, object positioning, distance monitoring in harsh environments

Core Specifications

1. Measuring Performance

Parameter	Specification
Measurement Range	0.2 m to 15 m
Absolute Accuracy	±25 mm
Repeat Accuracy	<5 mm
Reference Target	Kodak white (90% reflectivity)
Temperature Influence	Typ. ≤0.25 mm/K
Response Time	10 ms
Switching Frequency	50 Hz

2. Laser Characteristics

Parameter	Specification
Laser Class	Class 2 (IEC 60825-1:2007)
Wavelength	660 nm (visible red light)
Beam Divergence	1 mrad
Light Spot Diameter	<15 mm at 15 m (20°C)
Repetition Rate	250 kHz
Maximum Pulse Energy	<4 nJ
Service Life (Typ.)	85,000 h at Ta=+25°C
Angle Deviation	Max. ±2°

3. Electrical Specifications

Parameter	Specification
Operating Voltage (UB)	10–30 V DC; 18–30 V DC (IO-Link mode)
Ripple Tolerance	10% within supply tolerance
No-Load Supply Current	≤70 mA (24 V DC)
Time Delay Before Availability	1.5 s
Interface Type	IO-Link V1.0 (COM2, 38.4 kBit/s)
IO-Link Cycle Time	Min. 2.3 ms
Process Data Width	16 bit
SIO Mode Support	Yes
Switching Output	Push-pull, short-circuit/reverse polarity protected; max. 30 V DC, 100 mA
Analog Output	4–20 mA, short-circuit/overload protected

4. Environmental Conditions

Parameter	Specification
Ambient Temperature	-30°C to 50°C (-22°F to 122°F)
Storage Temperature	-30°C to 70°C (-22°F to 158°F)
Ambient Light Limit	50,000 Lux
Protection Class	IP65
Pollution Degree	1–2 (per IEC 60664-1)
Rated Voltage (Protection Class II)	≤250 V AC

Mechanical and Physical Details

1. Dimensions (mm)

Dimension	Value
Housing Height	88
Housing Width	25.8
Housing Depth	54.6
Mounting Hole Diameter	ø5.2

2. Construction

Parameter	Specification
Housing Material	ABS plastic
Optical Face Material	PMMA
Mass	90 g
Connection	4-pin M12 x 1 connector
Degree of Protection	IP65

Interface and Connection

1. Pin Configuration (4-pin M12 Connector)

Pin #	Wire Color (EN 60947-5-2)	Function
1	BN (Brown)	+UB (Power Supply)
2	WH (White)	Analog Output (Q2, 4–20 mA)
3	BU (Blue)	0 V (Ground)
4	BK (Black)	Switching Output (C/Q1, Push-pull)

2. IO-Link Interface Details

Parameter	Specification
Protocol Version	IO-Link V1.0
Communication Mode	COM2 (38.4 kBit/s)
Process Data Width	16 bit
SIO Mode Support	Yes
Compatible Masters	EtherNet/IP, PROFINET IO, Ethernet IO-Link modules (see Accessories)

Operational Controls and Indicators

1. Control Elements

5-step rotary switch: Selects operating modes (threshold setting, operating modes)
Threshold setting switch: Configures switching thresholds A and B
Teach-In button: Stores measured values, resets settings, calibrates outputs

2. LED Indicators

Indicator	Function	Status Description
Green (Operating Indicator)	Power/operation status	Solid: Normal operation; Flashing (4 Hz): Short circuit at output
Yellow (Function Indicators)	Switching state	Solid: Corresponding output active
Green/Yellow (Teach-In)	Teach-In status	Equiphase flashing (2.5 Hz): Successful teach-in; Non-equiphase flashing (8 Hz): Teach error

Teach-In and Configuration

1. Teach-In Procedures

Store Switching Threshold: Press and hold "SET" until LEDs flash in phase (≈2 s); release to start teach-in.
Overwrite Threshold: Repeats the above procedure for the target threshold (A or B).
Delete All Thresholds: Press and hold "SET" for >5 s; LEDs go out to confirm deletion.
Reset to Factory Settings: Set rotary switch to "RUN", press and hold "SET" for ≈10 s until green LED is solid.

2. Output Configuration

Output Type	Default Settings	Configurable Modes
Switching Output (Q1)	Inactive	Light on/Dark on (via connection assignment)
Analog Output (Q2)	A=200 mm (4 mA), B=5000 mm (20 mA)	Rising slope (A<B), Falling slope (A>B), Zero start point (delete A)

3. Teach-In Requirements

Minimum difference between thresholds A and B: >20 mm (exceeds switching hysteresis)
Unsuccessful teach-in (8 Hz flashing): Re-teach with larger threshold difference

Safety and Compliance

1. Safety Information

Laser Warning: Class 2 laser product – do not stare into the beam; avoid pointing at people.
Radiation Hazard: Unauthorized controls/adjustments may cause hazardous radiation exposure.
Maintenance: Repairs only by authorized personnel; ensure warning labels are visible.

2. Approvals and Certifications

Product Standard: EN 60947-5-2
Laser Safety: IEC 60825-1:2007; Complies with 21 CFR 1040.10/1040.11 (Laser Notice No. 50)
UL Approval: cULus Listed, Class 2 Power Source, Type 1 enclosure
CCC Approval: Not required (rated ≤36 V)

Accessories

1. Mounting Accessories

OMH-05/OMH-07-01: Mounting aid for ø12 mm round steel or 1.5–3 mm sheet
OMH-21/OMH-22: Mounting brackets for RL* series sensors
OMH-VDM28-01: Metal enclosure for protective panes/apertures
OMH-VDM28-02: Fine adjustment device for Series 28 sensors
OMH-RLK29-HW: Rear wall mounting bracket
OMH-RL28-C: Weld slag cover
OMH-K01/OMH-K03: Dove tail mounting clamps

2. IO-Link Masters

ICE2-8IOL-G65L-V1D: EtherNet/IP IO-Link master (8 I/O)
ICE3-8IOL-G65L-V1D: PROFINET IO IO-Link master (8 I/O)
ICE1-8IOL-G30L-V1D/ICE1-8IOL-G60L-V1D: Ethernet IO-Link modules (8 I/O)
IO-Link-Master02-USB: USB-powered IO-Link master with M12 sensor connection

3. Protective Accessories

OMH-VDM28-CID1: Protective enclosure

Shopping Guide

Purchase

No need to register to order from JMBom Electronics, but signing in lets you track your order like a pro. Give it a try for a smoother shopping ride.

Means

Easy peasy! Pay your way with PayPal, Credit Card, or wire transfer in USD. We've got you covered.

RFQ（Request for Quotations）

Get the freshest prices and stock updates by asking for a quote! Our sales team will shoot you an email within a day. It's that simple.

IMPORTANT NOTICE

1. Look out for your order details in your inbox! (If it's missing, check the spam folder just in case.)

2. Our sales manager will double-check the order and keep you posted on any price or stock changes. No worries, we've got you covered.

Shipping Rate

We ship orders once a day around 5 p.m., except Sunday. Once shipped, the estimated delivery time depends on the courier company you choose, usually 5-7 working days.