TLV6710DDCR: Package and Ordering Information

Overview

The TLV6710DDCR is a variant of the TLV6710 micropower window comparator, packaged in a Thin SOT-23-6 (DDC) format. This device is designed for high voltage applications, operating over a wide supply voltage range of 1.8V to 36V. It features high accuracy threshold voltages, low quiescent current, and open-drain outputs, making it suitable for a variety of applications including notebook PCs, smartphones, digital cameras, and portable medical devices.

Package Information

• Package Type: Thin SOT-23-6 (DDC)
• Pin Count: 6
• Body Size: 2.90mm × 1.60mm
• Package Drawing: DDC0006A

Ordering Information

• Part Number: TLV6710DDCR
• Status: Active
• Material Type: Production
• Package Quantity: 3000
• Carrier: Large Tape & Reel (T&R)
• RoHS Compliance: Yes
• Operating Temperature Range: -40°C to 125°C
• Part Marking: 1I61
• Lead Finish/Ball Material: NIPDAU
• Moisture Sensitivity Level (MSL): Level-2-260C-1 YEAR
• Peak Reflow Temperature: Refer to shipping label

Detailed Package Dimensions

• A0 (mm): 3.2
• B0 (mm): 3.2
• K0 (mm): 1.4
• P1 (mm): 4.0
• W (mm): 8.0
• Pin1 Quadrant: Q3

Tape and Reel Information

• Reel Diameter: 180.0 mm
• Reel Width (W1): 8.4 mm
• Tape Length: 213.0 mm
• Tape Width: 191.0 mm
• Tape Height: 35.0 mm

Layout and Design Considerations

• Decoupling Capacitor: Place a 0.1-μF decoupling capacitor close to the VDD pin.
• Resistor Divider: Ensure the current through the resistor divider network is at least 100 times the input current to maintain accuracy.
• Output Pull-Up: Use pull-up resistors to hold the output lines high when in high-impedance state. Recommended values are around 100 kΩ for low-capacitive loads.

Additional Resources

• Data Sheet: For detailed electrical and mechanical specifications, refer to the TLV6710 data sheet available on the Texas Instruments website.
• Evaluation Modules: The DIP Adapter Evaluation Module can be used to convert the SOT-23-6 package to a standard DIP-6 pinout for prototyping and bench testing.
• Design Support: For further assistance, visit the Texas Instruments E2E Community or contact TI's Design Support for technical inquiries