BAV70W Datasheet Summary

Product Overview

The BAV70W is a small signal diode designed for surface-mount applications. It is suitable for high-speed switching and rectifying applications, with the following key features:

• Very high switching speed
• Low junction capacitance
• Low leakage current
• Compliant with RoHS, REACH, and Conflict Minerals regulations
• Available in AEC-Q101 qualified versions for automotive applications

Electrical Characteristics

Maximum Ratings

• Power Dissipation (Ptot): 200 mW
• Maximum Forward Current (IFAV):Single diode loaded: 175 mABoth diodes loaded: 100 mA
• Repetitive Peak Forward Current (IFRM): 500 mA
• Non-Repetitive Peak Forward Surge Current (IFSM):tp ≤ 1 s: 0.5 Atp ≤ 1 ms: 1 Atp ≤ 1 µs: 2 A
• Repetitive Peak Reverse Voltage (VRRM): 100 V
• Reverse Voltage (VR): 85 V
• Junction Temperature (Tj): -55°C to +150°C
• Storage Temperature (TS): -55°C to +150°C

Typical Characteristics

• Forward Voltage (VF):Tj = 25°C, IF = 1 mA: < 715 mVTj = 25°C, IF = 10 mA: < 855 mVTj = 25°C, IF = 50 mA: < 1.0 VTj = 25°C, IF = 150 mA: < 1.25 V
• Leakage Current (IR):Tj = 25°C, VR = 25 V: < 30 nATj = 25°C, VR = 75 V: < 1.0 µATj = 150°C, VR = 25 V: < 30 µATj = 150°C, VR = 75 V: < 50 µA
• Junction Capacitance (CT):VR = 0 V, f = 1 MHz: < 2 pF typical, 2 pF max
• Reverse Recovery Time (trr):IF = 10 mA, IR = 10 mA to 1 mA: < 4 ns

Mechanical Characteristics

• Package Type: SOT-323
• Weight: Approximately 0.01 g
• Case Material: UL 94V-0
• Solder & Assembly Conditions: 260°C/10s
• Moisture Sensitivity Level (MSL): 1

Ordering Information

• Marking Code: 'PH'
• Tape and Reel: 3000 units per 7" reel

Applications

• Signal processing
• High-speed switching
• Rectifying

Disclaimer

1. The information presented in the datasheet is believed to be accurate but is not guaranteed. No warranty or guarantee, expressed or implied, is made regarding the capacity, delivery, performance, or suitability of any product.
2. Some products are available with special grades such as AEC-Q101 compliant or qualified for automotive applications.
3. Customers using these parts in applications requiring a specific grade of quality or reliability (e.g., life-supporting devices) are responsible for validating the appropriateness of the product. Diotec does not assume any liability for such applications.
4. Customers must incorporate sufficient safety measures in their designs to prevent personal injury, fire, or environmental damage.
5. Information is subject to change without notice. Regular updates are provided on the company website.
6. Information is intended solely for ordering Diotec products and should not be used for any other purpose.
7. Export of products falling under strategic controls requires obtaining an export license in accordance with valid laws.